6 Useful Tips for Keeping Your Pool Sparkling Clean During the Summer

Last updated on April 9, 2024

It’s already the middle of summer and if you’re like most people, you haven’t given much thought to your pool since opening it up a few weeks or even months ago.

But just because the days are getting shorter doesn’t mean you can slack off on pool maintenance. If anything, the heat of summer makes it even more important to keep your pool sparkling clean.

However, it is often easier said than done. With a busy lifestyle and family commitments, it can seem like a never-ending battle to keep things clean, especially when it comes to the pool. Luckily, there are some general tips you can follow to make things a little easier.

So, here are the top 6 helpful tips for keeping your pool sparkling clean the whole summer long:

1of 6

Clean the Deck

pool cleaning

The pool deck is one of the dirtiest areas around the pool. It’s constantly being walked on with wet shoes and tracked in all sorts of debris. So, it’s important to keep it clean not only for aesthetic reasons but also for safety. A slippery deck can be extremely dangerous, especially for young children.

To clean the deck, start by sweeping it with a broom to remove any large debris. Then, use a hose to wash away any dirt or grime that’s left behind. If you have a pressure washer, that will make things even easier. Just be careful not to damage the surface of the deck. For tough stains, you can use a deck cleaner and scrub brush. And if you have tile on your deck, be sure to sweep and mop it as well.

2of 6

Clean Walls and Floors Thoroughly

The walls and floors of the pool can get just as dirty as the deck, if not dirtier. So, it’s important to give them a good cleaning regularly. The most common way to clean the walls and floors is with a pool brush. Start by brushing any dirt or debris that’s clinging to the surface. Then, use a hose to wash away anything that’s left behind.

However, if you want to ensure the maximum level of cleanliness, you may consider investing in a robotic pool cleaner. These devices are specifically designed to clean the walls and floors of the pool and do a much better job than a manual brush. If you decide to get a robotic swimming pool cleaner, make sure to get one that’s specifically designed for the type of pool you have. You should also consider the size of your pool when making your purchase and find the one that best suits your needs. While these cleaners are not cheap they’ll save you a lot of time and effort in the long run.

3of 6

Test the Water Regularly

This one seems like a no-brainer but you’d be surprised how many people forget to do it. Testing your water regularly is essential to keeping your pool clean and safe for swimming. The easiest way to test the water is with a pool test kit which can be purchased at any local pool supply store. Test the water at least once a week and adjust the chemicals accordingly.

The three main things you’re looking for are pH levels, chlorine levels, and alkalinity. The ideal pH level is 7.4-7.6, chlorine should be between 1-3 ppm (parts per million), and alkalinity should be 80-120 ppm. If the levels are off, you can use chemicals to adjust them. Just be sure to always follow the manufacturer’s instructions.

4of 6

Shock the Pool Regularly

shocking the pool is a process of adding a high concentration of chlorine to the water to kill off any bacteria or algae. It’s something that should be done every week or two, especially during the hot summer months. The high heat and constant use of the pool can lead to an increase in algae growth so it’s important to keep on top of things.

To shock the pool, you’ll need to purchase a professional-grade chlorine cleaner from your local pool supply store. Follow the instructions on the package and add the recommended amount of chlorine to the water. Then, let the pool sit for at least 24 hours before swimming. This will give the chlorine time to work its magic and kill off any unwanted bacteria.

5of 6

Skim the Surface Often

To keep the pool clean, you need to remove any debris that’s floating on the surface. This can be things like leaves, bugs, twigs, and even dirt. The best way to do this is with a pool skimmer. It’s a long-handled net that’s specifically designed for scooping up debris from the water.

Use the skimmer to remove as much debris as possible from the surface of the water. You should do this at least once a day, but more often if necessary. After Skimming, use the hose to rinse off the skimmer so it doesn’t get clogged up with debris. The best way to avoid having to skim the pool too often is to keep trees and shrubs trimmed away from the perimeter. This will help prevent leaves and other debris from blowing into the water.

6of 6

Clean the Filter Regularly

The filter is one of the most important parts of the pool and it needs to be cleaned regularly. Depending on the type of filter you have, there are different ways to clean it. For instance, sand filters need to be back washed once a week or so. This is a process of reversing the flow of water through the filter to remove any dirt or debris that’s been collected.

Other types of filters, like cartridge filters, need to be taken apart and cleaned with a hose. And still other filters, like diatomaceous earth filters, need to have the DE powder replaced on a regular basis. No matter what type of filter you have, be sure to follow the manufacturer’s instructions for cleaning it properly. Not only will this help keep your pool clean, but it will also extend the life of your filter and save you money in the long run.

As you can see, even though pools require quite a bit of work to maintain, with a bit of effort, it’s definitely doable. By following these simple tips, keeping your pool clean all summer long will be a breeze. Just remember, the key is to be consistent with your cleaning routine and to take action as soon as you see any dirt or debris. With a little bit of help, your pool will stay sparkling clean all season long!

Continue reading:

Read more

Read more

Read more

Read more